Retractable Privacy Car Curtains For Toyota Land Cruiser Model 1980-1984
Rs 7500.00Rs 5500.00
Main Types Available for Land Cruiser (1980–1984)
Rail Track Sliding VIP Curtains
Mounting: Aluminum or high-flex PVC tracks mounted onto the top and bottom inner door frame using heat-resistant 3M double-sided acrylic adhesive tape or subtle mounting screws.
Operation: Smooth horizontal manual sliding along micro-runners; fastens neatly to B/C pillars using tie-back straps when open.
Best For: Complete blackout privacy, period-correct overland camping aesthetics, and maximum sun block.
Custom Magnetic & Snap Mesh Shades
Mounting: Built-in high-strength neodymium magnets clamp directly to the solid metal inner window frames standard on 1980s Land Cruisers.
Operation: Tool-free press-fit or magnetic detachment in under 3 seconds per door.
Best For: Driving or camping with manual roll-down windows open while keeping bugs out and airflow circulating.
Spring-Loaded Roller Retractable Shades
Mounting: Attaches to the lower door panel sill or clips onto the top edge of the window glass.
Operation: Automatically unrolls and retracts along with window movement or manual pull-down tab.
Best For: Quick daily sun protection without bulky fabric hanging when not in use.
Key Specifications & Compatibility
Feature | Details |
Compatible Models | Toyota Land Cruiser 60 Series (FJ60, BJ60, HJ60) & late 40 Series (1980–1984) |
Material Options | UV-blocking honeycomb mesh or thick double-layered opaque polyester |
Front Window Profile | Tapered/cutaway design ensuring full view of side mirrors and vent windows |
Rear & Cargo Area | Tailored to fit 2nd-row side doors and large rectangular rear cargo side glass |
Window Operation | Full manual crank window operation remains completely unobstructed |
Installation Sequence for Rail Track Curtains
1.Clean and Prep Window Frame:Critical for adhesive grip on vintage metal or vinyl trims.
Wipe down the inner metal door frame or plastic door capping using isopropyl alcohol to eliminate old dust, wax, grease, and interior dressings.
2.Dry-Fit and Align Rail Strips:Verify top and bottom track straightness along flat 60-Series frame.
Hold the upper and lower tracks against the door frame edge to confirm lengths and check clearance for manual window cranks and locks.
3.Mount Track Rails:Apply steady pressure across the entire rail length.
Peel the 3M tape liner, press the tracks firmly against the frame for 30 seconds per section, and allow 2 to 4 hours to fully cure before hanging curtain weight.
4.Insert Gliders and Lock End Caps:Prevents curtain runners from sliding out of the track.
Thread the fabric curtain gliders into the rail channels, check for smooth sliding action, and snap the rubber end stoppers onto both ends of each rail.
