Retractable Privacy Car Curtains For MG Zs Model 2021-2023
Rs 7500.00Rs 5500.00
Retractable privacy car curtains and custom window shades designed for the MG ZS subcompact crossover (covering 2021–2023 pre-facelift and facelift models, including 1.5L VTi-tech Petrol, 1.3T ZST, and 44.5kWh / 51kWh ZS EV variants) deliver solar heat defense, UV glare protection, and complete cabin privacy tailored to the crossover's door profiles.Popular Types for MG ZS (2021–2023)
Custom Fit Magnetic Mesh Shades (Most Popular)
Mounting: High-strength neodymium magnets embedded in a precision wire frame snap directly onto the inner exposed steel door frame outline of the MG ZS chassis.
Operation: Tool-free press-fit attachment or removal in under 3 seconds per window; stays securely in place when rolling down power windows for fresh air.
Best For: Sleek, low-profile heat reduction while keeping out direct sun glare and insects—ideal for ZS EV models to minimize air-conditioning load and preserve battery range.
Rail Track Sliding VIP Curtains
Mounting: Precision flexible polymer or aluminum track rails attached to the upper and lower inner door trim using heat-resistant 3M double-sided acrylic adhesive tape.
Operation: Fabric glides horizontally on micro-runners and fastens neatly to B/C pillars using tie-back straps when pulled open.
Best For: Complete blackout interior privacy, maximum cabin heat insulation while parked or charging, and an executive VIP aesthetic.
Spring-Loaded Roller Retractable Shades
Mounting: Secures along the lower door panel sill or clips onto the top edge of the window glass frame.
Operation: Automatically unrolls and retracts in sync with power window glass movement.
Best For: Quick daily convenience without manual fabric sliding or handling.
Key Specifications & Compatibility
Feature | Details |
Compatible Models | MG ZS / ZS EV (1.5L VTi-Tech, 1.3L Turbo, 44.5kWh / 51kWh EV; 2021–2023) |
Fabric Options | UV-reflective honeycomb polyester mesh or high-density double-layered opaque stretch fabric |
Front Window Cutout | Tapered half-cut profile ensuring completely unobstructed side mirror and blind-spot visibility |
Rear & Quarter Glass | Precision-cut to accommodate the rear passenger door frame and fixed C-pillar glass |
Window Usability | Full power window roll-down operation remains completely functional |
Installation Sequence for Rail Track Curtains
1.Clean and Prep Window Frame:Critical for long-term 3M tape adhesion on SUV door trim.
Wipe down the inner plastic window surround using isopropyl alcohol to eliminate interior silicone dressings, wax, and fine dust particles.
2.Dry-Fit Rail Tracks:Match top and bottom tracks to the MG ZS door arch.
Hold the upper and lower track rails against the door frame arch to verify exact alignment, check end-cap clearance, and ensure smooth glass travel.
3.Mount Track Rails:Apply firm, even pressure along the entire length.
Peel the 3M tape backing, press the tracks firmly against the window frame for 30 seconds per section, and allow 2 to 4 hours to cure before hanging fabric weight.
4.Insert Gliders & Lock End Caps:Prevents curtain gliders from sliding out.
Thread the fabric curtain runners into the rail channels, check for smooth sliding action, and snap the rubber stoppers onto both ends of each rail.
